This air compressor price guide puts real numbers on the table. We have collected current price ranges from Indian B2B marketplaces and published industry references, organized them by compressor type and size, and explained what pushes a price up or down. You will also see how the purchase price compares with the electricity bill a compressor runs up over its life, because that is where most of the money goes.
Times Marketing Pvt. Ltd. has supplied and serviced Atlas Copco compressed air equipment since 1988. The ranges below reflect the wider Indian market, not only our own products, so you can use them to benchmark any quote you receive.
A quick note before the numbers: every price here is indicative. Prices change with steel costs, exchange rates, brand, specification and region, and most listings quote the machine alone, before 18% GST, delivery, installation and air treatment. Treat these ranges as a starting point for a conversation with a supplier, not as a final figure.
Air Compressor Price in India at a Glance
The table below summarizes the typical air compressor price in India by category, based on listings and published references from 2026.
| Compressor type | Typical size | Indicative price range (machine only) |
|---|---|---|
| Small piston (single-stage, local brands) | 1–3 HP | ₹15,000 – ₹65,000 |
| Branded small piston | 2–5 HP | ₹69,000 – ₹1.25 lakh |
| Piston, 5 HP | 5 HP | ₹41,000 – ₹1.25 lakh |
| Two-stage piston / tandem piston | 7.5–20 HP | ₹1.8 lakh – ₹4.5 lakh |
| Entry rotary screw | 5–15 HP | ₹95,000 – ₹2.5 lakh |
| Mid-size rotary screw | 20–50 HP | ₹2 lakh – ₹6.5 lakh |
| Large rotary screw | 60–100 HP | ₹5.3 lakh – ₹12 lakh |
| VSD / VSD+ screw (premium brands, 18–90 kW) | 25–120 HP | ₹10 lakh – ₹30 lakh |
| Large industrial systems | 110 kW and above | ₹30 lakh and above |
| Small oil-free piston / scroll | 2–10 HP | ₹75,000 – ₹3 lakh |
| Oil-free screw (Class 0) | 30 kW and above | ₹15 lakh and above |
The spread inside each row is wide for a reason. A ₹40,000 screw compressor and a ₹4 lakh screw compressor are not the same machine with a different sticker. The next section explains why.
What Drives the Price of an Air Compressor
Seven factors decide where a compressor sits in the range. Understanding them helps you compare quotes on equal terms.
Compression technology
Piston (reciprocating) compressors are the cheapest way to make compressed air at small capacities. They are simple, rugged and easy to repair, but they are designed for intermittent duty. Rotary screw compressors cost more upfront but run continuously, deliver steady pressure and use less energy per unit of air at medium and large capacities. Oil-free and centrifugal designs sit at the top of the range.
Motor power and free air delivery (FAD)
Horsepower is the number most buyers compare, but free air delivery, measured in CFM or m³/min, is the number that matters. Two 10 HP compressors can deliver very different volumes of air depending on the air-end design and working pressure. When you compare prices, compare cost per CFM at your working pressure, not cost per HP.
Working pressure
Most plants run between 7 and 10 bar. Higher-pressure machines (12 bar and above, or two-stage piston units rated up to 30–40 bar for applications like PET blowing) need stronger components and cost more.
Oil-lubricated or oil-free
Oil-free compressors avoid lubricating oil in the compression chamber, which matters for pharmaceutical, food, electronics and healthcare applications. Certified ISO 8573-1 Class 0 machines carry a significant premium over oil-lubricated equivalents.
Fixed speed or variable speed drive (VSD)
A fixed-speed compressor runs at full speed and unloads when demand drops, still drawing power while it idles. A VSD air compressor adjusts motor speed to match demand. VSD models cost more at purchase, but where air demand fluctuates through the day, they usually pay back the difference through lower power bills.
Brand, build quality and controls
Branded compressors use better air-ends, higher-efficiency motors (IE3/IE4), smarter controllers and better cooling. They also come with genuine spare parts, structured service and warranty support. Unbranded machines are cheaper, but service intervals, part availability and real FAD often differ from the brochure.
Air treatment, installation and taxes
The compressor is only one part of a compressed air system. An air dryer, filters, an air receiver tank, piping, electrical work and commissioning can add 20–50% to the project cost. GST is typically charged at 18% on top of listed prices.
Piston Air Compressor Price
Piston compressors remain the default choice for garages, tyre shops, small fabrication units and any application where air is needed in bursts rather than all day.
Single-stage piston compressors (1–5 HP)
Local-brand single-stage units of 1–2 HP start at around ₹15,000 and run up to about ₹45,000 depending on tank size and build. 3 HP models typically sit between ₹34,500 and ₹65,000. The 5 HP air compressor price ranges from roughly ₹41,000 for basic models to ₹75,000–₹84,000 for units with larger 200–250 litre tanks.
Branded small piston compressors cost more. Market listings show branded 2 HP units at around ₹69,000, branded 3 HP units at ₹88,000–₹96,000 and branded 5 HP units at ₹1.17–₹1.25 lakh.
Two-stage and heavy-duty piston compressors (5–20 HP)
Two-stage piston compressors compress air in two steps with intercooling, which allows higher pressures and better efficiency. Published 2026 references place double-stage reciprocating compressors of 5–20 HP at ₹2.2–₹4.5 lakh, and single-stage or tandem piston units of 7.5–15 HP at ₹2–₹3.8 lakh. Marketplace listings for 15 HP industrial piston units start around ₹1.8 lakh.
Atlas Copco LE/LT piston compressors
Times Marketing supplies Atlas Copco LE (single-stage) and LT (two-stage) piston compressors, built with cast-iron construction for long life and available for pressures up to 40 bar. Small Atlas Copco piston compressors in the 5–15 kW class start from approximately ₹2–5 lakh. They suit auto workshops, tyre manufacturing, metal fabrication, construction support and high-pressure applications.
When a piston compressor makes sense: your plant uses air for less than 60–70% of the shift, you need high pressure in short bursts, or your total demand is below about 30–40 CFM.
Read more: What Is a Piston Compressor and How Does It Work?
Screw Air Compressor Price
Rotary screw compressors are the workhorses of Indian manufacturing. They run continuously, deliver steady pressure, and are the most common choice for automotive, textile, packaging, plastics and general engineering plants.
Entry-level screw compressors (5–15 HP)
The cheapest screw compressors on marketplaces are listed from about ₹95,000. Typical 10 HP screw compressor prices fall between ₹1 lakh and ₹1.5 lakh for local brands, while a 7.5 HP unit delivering around 24 CFM is listed at about ₹2.1 lakh. Tank-mounted screw compressors, which combine the compressor, receiver and sometimes a dryer on one skid, are popular in this class because they save floor space.
Mid-size screw compressors (20–50 HP)
This is where most small and medium factories buy. Listings show 30 HP screw compressors from about ₹2 lakh, a 25 HP model at roughly ₹4.2 lakh including GST, and a 30 HP (22 kW) variable speed compressor at about ₹4.6 lakh. Expect ₹2.5–₹6.5 lakh for local and mid-tier brands in this band.
Large screw compressors (60–100 HP)
A 60 HP screw compressor is listed at around ₹5.35 lakh, and published 2026 references place rotary screw compressors of 10–100 HP between ₹2.5 lakh and ₹12 lakh. Water-cooled versions, built-in dryers and advanced controllers push the price toward the upper end.
Atlas Copco GA rotary screw compressors and VSD+
The Atlas Copco GA series is one of the most widely used industrial compressor ranges in India. Times Marketing supplies the full line:
- GA 5–15 (fixed speed and VSD), compact units for small and medium factories
- GA 18–90 VSD+, high-efficiency variable speed models for mid-size operations
- GA 110–315 VSD+, large-capacity compressors for heavy industry
- GA 355–900+, very large industrial and utility applications
Atlas Copco rates its VSD+ technology at up to 35% energy savings compared with fixed-speed compressors. Full Feature versions come with an integrated dryer and filters, and the Elektronikon controller with SMARTLINK allows remote monitoring and predictive maintenance alerts. As a guide, mid-size Atlas Copco rotary screw compressors (18–90 kW, VSD+) fall in the ₹10–30 lakh range, and large systems above 110 kW start from about ₹30 lakh.
That is a clear premium over local screw compressors. The next section shows why many plants still find it the cheaper option over ten years.
Read more: How Rotary Screw Air Compressors Work | Screw vs Piston Compressor: A Buyer’s Guide
Oil-Free Air Compressor Price
If even a trace of oil can contaminate your product, an oil-free air compressor is a requirement, not a choice. Pharmaceutical plants, food and beverage units, electronics and semiconductor manufacturers, hospitals and laboratories all fall in this group.
Small oil-free piston compressors for dental clinics and laboratories are listed from about ₹75,000 to ₹1.2 lakh. Oil-free scroll and small oil-free screw units range from roughly ₹2.8 lakh upward. Industrial oil-free screw compressors with ISO 8573-1 Class 0 certification start in the teens of lakhs and rise sharply with capacity.
Times Marketing supplies three Atlas Copco oil-free ranges:
- SF 2–15 scroll compressors: ultra-quiet, compact units for laboratories, medical facilities and small clean-air applications
- ZT 30–90 oil-free screw (air-cooled): mid-range industrial oil-free air
- ZR 45–900 oil-free screw (water-cooled): heavy-duty, large-scale Class 0 air, with ZA/ZD centrifugal options for very large flows
A practical caution: “oil-free” on a cheap listing does not always mean certified Class 0 air. Ask for the ISO 8573-1 class in writing before comparing prices.
Read more: Why Oil-Free Air Compressors Are Important for Clean Air Applications
Air Dryer, Air Filter and Air Receiver Prices
Many buyers budget only for the compressor and then discover that their air is wet, oily or unstable. A complete compressed air system usually needs three more components.
Air dryer price
Compressed air carries moisture that condenses in pipes, rusts valves and spoils finished products, especially during the Indian monsoon.
- Refrigerated air dryers bring the pressure dew point to around +3°C and suit most general manufacturing. Small units for 20 CFM are listed from about ₹20,000–₹40,000, mid-size dryers sit around ₹45,000–₹1 lakh, and larger branded units can cost ₹1.5–₹2.2 lakh.
- Desiccant air dryers reach dew points of -40°C to -70°C for pharma, food and electronics. Small heatless desiccant dryers start at a few thousand rupees for point-of-use units, and a 100 CFM heatless dryer is listed at about ₹86,000. Heated and blower-purge designs cost more but use less compressed air.
Times Marketing supplies Atlas Copco refrigerated and desiccant air dryers, along with membrane dryers for point-of-use applications.
Air filter price
Line filters remove dust, oil aerosols and fine particles. Individual filter housings are relatively inexpensive, but replacement elements are a recurring cost. Times Marketing supplies Atlas Copco general-purpose, coalescing, activated carbon and silicone-free filtration.
Air receiver tank price
An air receiver tank stores compressed air, smooths out pressure swings and reduces how often the compressor loads and unloads. Price depends on volume, design pressure and certification. Times Marketing supplies Atlas Copco air receivers, including HTA-style receivers, plus water-cooled and air-cooled aftercoolers.
Rule of thumb: budget an extra 20–50% of the compressor price for the dryer, filters, receiver, piping and installation.
Read more: Complete Guide to Selecting an Air Dryer Supplier in India | How to Select the Best Compressed Air Receiver Tank in India
Purchase Price vs Lifetime Cost: The Number That Really Matters
The purchase price of an industrial air compressor is usually the smallest part of what it costs you. Electricity typically accounts for 70–80% of a compressor’s lifetime cost, with maintenance and the original purchase making up the rest.
An illustrative example
Take a 30 kW (40 HP) screw compressor running two shifts, about 6,000 hours a year, at an average 85% load. At an industrial tariff of ₹8 per kWh:
30 kW × 0.85 × 6,000 hours × ₹8 = roughly ₹12.2 lakh of electricity every year.
Over ten years, that is more than ₹1.2 crore in power, against a machine that cost somewhere between ₹4 lakh and ₹15 lakh depending on brand and specification.
Now imagine your air demand swings through the day, as it does in most plants. A VSD compressor that cuts energy use by even 20% saves about ₹2.4 lakh a year in this example. At the full 35% savings Atlas Copco rates for VSD+, the figure rises to over ₹4 lakh a year. In many cases the price difference between a fixed-speed and a VSD machine is recovered in one to two years.
Hidden costs of a cheap compressor
A low quote can become expensive through:
- Lower real FAD than claimed, forcing you to buy a second machine
- Higher specific power (kW per CFM), which inflates the power bill every month
- Short service intervals and costly non-genuine parts
- Unplanned downtime when parts are not available locally
- Moisture and oil carry-over damaging tools and products
When you compare quotes, ask each supplier for the FAD at your working pressure and the specific power figure. Those two numbers tell you more than the price tag.
Read more: The Benefits of Owning the Best Air Compressor in India
How to Get an Accurate Air Compressor Quote
You will get a sharper, more comparable quote if you share the right information upfront. Before you call any supplier, note down:
- Total air demand: the CFM or m³/min of all tools and machines that run at the same time, plus a 20–30% buffer for growth
- Working pressure: the highest pressure any connected equipment needs
- Duty cycle: hours per day and whether demand is steady or fluctuating
- Air quality: whether you need oil-free air and what dew point your process needs
- Power supply: voltage, phase and available load at the site
- Space and cooling: floor area, ventilation and ambient temperature
- Existing equipment: if you are replacing a machine, its make, model and running hours
If you do not know your air demand, a site assessment can measure it. Oversizing wastes money on every unloaded hour, and undersizing forces the compressor to run flat out until something fails.
Read more: How to Choose the Right Industrial Compressor for Your Plant
Why Buy From an Authorized Air Compressor Distributor
The Indian compressor market includes authorized channel partners, independent traders, refurbished-equipment sellers and small local assemblers. Prices vary accordingly, and so does what you get after the sale.
Buying from an authorized air compressor distributor in India gives you:
- Genuine products with valid manufacturer warranty
- Correct sizing advice based on your actual demand
- Professional installation and commissioning
- Genuine spare parts and service kits
- Trained engineers who know the product
- A clear escalation path to the manufacturer if needed
A compressor running 6,000 hours a year will need consumables, service and the occasional repair throughout its life. The relationship with your supplier lasts as long as the machine.
Read more: Why Choosing an Authorized Air Compressor Distributor in India Matters
Atlas Copco Air Compressors and Services From Times Marketing
Times Marketing Pvt. Ltd. is an authorized channel partner of Atlas Copco (India) Ltd., based in Faridabad, Haryana. Since 1988, we have supplied complete compressed air systems to manufacturing, automotive, pharmaceutical, food and beverage, textile, electronics, healthcare, chemical and packaging units across India.
Products we supply
- Rotary screw air compressors: Atlas Copco GA series, fixed speed and VSD+, from 5 kW to 900+ kW, air-cooled and water-cooled
- Oil-free air compressors: SF scroll, ZT and ZR oil-free screw, and ZA/ZD centrifugal, ISO 8573-1 Class 0
- Piston air compressors: LE single-stage and LT two-stage, up to 40 bar
- Air dryers: refrigerated, desiccant and membrane dryers
- Air filters: general-purpose, coalescing, activated carbon and silicone-free filtration
- Air receivers and aftercoolers: compressed air receiver tanks, water-cooled and air-cooled aftercoolers
- Rental compressors: screw compressors for shutdowns, construction and peak production
- Material handling: cranes and components through our Demag partnership
Services we offer
- Free site assessment and air demand sizing
- Professional installation and commissioning
- Operator training
- Annual Maintenance Contracts (AMC) and preventive maintenance
- Genuine Atlas Copco spare parts
- Emergency breakdown support
- Remote monitoring through Atlas Copco SMARTLINK
- System integration of compressors, dryers, filters and receivers
Where we serve
From our Faridabad base, we supply and support customers in Delhi, Faridabad, Gurgaon, Noida, Mumbai, Pune, Bangalore, Chennai, Coimbatore, Hyderabad, Kolkata, Ahmedabad, Surat, Rajkot, Vadodara, Jaipur, Chandigarh, Lucknow, Ludhiana and other industrial centres.
If you are looking for an air compressor dealer in Faridabad or an air compressor supplier in Delhi NCR, our team can visit your site, measure your demand and share a quote built around your real requirement.
Conclusion: Budget for the Air, Not Only the Machine
The right compressor is the one that delivers the air your plant needs at the lowest cost per year of operation, not the one with the lowest invoice. Piston compressors are the economical entry point for intermittent duty. Screw compressors pay their way in continuous operations, and VSD models usually earn back their premium through lower power bills. Oil-free machines are essential where air quality cannot be compromised.
Your next step is simple: list your tools, their air consumption, your working pressure and your daily running hours. With those four numbers, any supplier can give you a quote you can compare honestly.
Get an accurate Atlas Copco air compressor quote today.
Free site assessment, right-sized recommendations and after-sales support from an authorized Atlas Copco channel partner since 1988.
Sales: +91 98214 97560
Office: 0129-4050169 | 011-29942370
Email: info@timesmarketing.com